Objective

Setting up a Custom domain in Jumper.ai

Applies To

• Custom domain
• Jumper

Note: Changing your custom domain will affect your Jumper.ai store URL, checkout URLs & referral campaign URLs.

Procedure

1. First Navigate to Settings >> Setup your domain on the Jumper.ai dashboard.
   
   
   
2. Add your domain URL to host your store, in case you want to use your subdomain URL to host, then select the option Yes to enter a subdomain URL. Once added, click on Next.
   
   
   
   
3. Based on your requirements follow the steps to setup your DNS for domain & sub-domain:
   
   For Domain configuration:
   
   
   
   Login to your DNS manager & create 2 records.
   
   Step 1:
   First, create the TXT record type by adding the following details:
   
   A. Keep the Host Name Blank or add @.
   B. Select the TXT under record type.
   C. Paste the link copied from the Jumper.ai dashboard under the value/route.
   D. Set the Time to Live (TTL) at 3600 seconds (or 1 hour) & save the record.
   
   
   
   Step 2:
   Now create the A record type by adding the following details:
   
   A. Keep the Name/Host? Alias blank or add @.
   B. Now select record type A.
   C. Choose the endpoint option for  Value/Answer/Destination & add the record values as shown on your Jumper.ai dashboard. (Note: some hosts use different labels for the name and value fields)
   D. Set the Time to Live (TTL) at 3600 seconds (or 1 hour) & save the record
   
   
   
   Wait for DNS to propagate (this may take a few hours).
   After following the above steps, click the Verify domain setup button on the Jumper.ai dashboard to verify if your DNS has been set up correctly.
   
   Sub-Domain configuration:
   
   
   
   Login to your DNS manager & create 2 records.
   
   Step 1:
   First, create the TXT record by adding the following details:
   
   A. Keep the Host Name Blank or add @.
   B. Select the TXT under record type.
   C. Paste the link copied from the Jumper.ai dashboard under the value/route.
   D. Set the Time to Live (TTL) at 3600 seconds (or 1 hour) & save the record.
   
   
   
   Step 2:
   Now create the CNAME record type by adding the following details:
   
   A. Keep the Record Name Blank or add @.
   B. Now select the record type as CNAME (i.e. routes traffic to another domain) in your DNS Manager.
   C. Under Value/Route traffic, add the link “jump.jumper.ai”.
   Your subdomain, e.g. shop.yourdomain.com should point to jump.jumper.ai
   D. Set the Time to Live (TTL) at 3600 seconds (or 1 hour) & save the record.
   
   
   
   Wait for DNS to propagate (this may take a few hours).
   After following the above steps, click the Verify domain setup button on the Jumper.ai dashboard to verify if your DNS has been set up correctly.
   
   
4. Once the verification is done, you can check the status of your connected domain.
   
   
   
   In case your status is shown as Not verified, then click on the Check instructions & verify button, to verify the steps again.
   
   
   
   
5. You can also apply for an SSL certificate to secure your domain. You can enable SSL by entering the public certificate & private key under the SSL certificate section, then click on Apply SSL.
   
   
   
   
6. If you want to disconnect your domain, simply click the Disconnect option.