Objective

Connecting a soft client with Vonage SIP trunk to make outbound calls.

Applies To

• SIP Trunk
• VoIP Phones
• Outbound Calls

Procedure

You can connect a VoIP soft or hard phone directly to Vonage SIP trunk for outbound calls only. It is not possible to configure a soft or hard phone directly to receive inbound calls as this will need to be routed by a routing engine back to the phone, such as via a PBX to allow the phone to register. To use Vonage's SIP trunks for your VoIP phone calls, use the following credentials:

• Host: sip-us.vonage.com (AMER), or sip-eu.vonage.com (EMEA), or sip-ap.vonage.com (APAC), depending on your region.
• Username: Your Vonage API Key
• Password: Your Vonage API Secret